After removing doors to correct door gaps by either welding in filler rod to shrink door gap or by cutting/welding door skin to enlarge gap I needed to reinstall and adjust glass. regulator and tracks.
I thought some of the youtubers were exaggerating when they claimed it can take up to 8 hours to adjust one window, they weren't, I spent over 3 days trying to get them right!
I started with getting the doors installed so that the body lines were right, the door gaps looked good and finally the door skins were on the same plane as the surrounding sheet metal. Next I installed the side vent window and adjusted it to line up with the foam seal to ensure no leaks existed. I then installed the door window glass so that if would ride up in the track that is